Alternate Text

TECHNICAL DATA SHEET

Products Name

Protective Film For ,Mirror Backing Safety

Base

PE

Type of Adhesive

Water based glue

Color

Milky white

Thickness(Micorn/μ)

Widely use: 70mic ~ 200mic

Width

Widely use:10mm-1600mm

Length

Widely Use:100m-1500m

Printability

Tensile Strength

Elongation

UV Resistance

Application

Mirro Back Surface Protective Film is a high adhesion, puncture resistance film, specially designed for safety of mirror back surface. With this film, even if the mirrors are broken, there is less injury to humans for the broken glasses.


• Surfaces to be protected should be dry, free from dust, oil, solvents or other chemicals. • The best results are obtained with temperature of surface and surroundings at +15°C to 40°C. • Use laminating machines with rubber coated press rollers. • Try to eliminate or minimise film elongation, and the formation of air bubbles and folds during lamination. • Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C). • The film is not suitable for extreme thermoforming.

back
Alternate Text

Qingdao Laishun Plastics Co., Ltd

Address:Zhonghuabu Industrial Park, Jihongtan Street, Chengyang District, Qingdao City, Shandong Province, China 266111

E-mail:info@laspef.com

Tel:+86-053266851689 Ext: 801 or 802

Mob:+8615588625625

Alternate Text

Copyright © 2017 青岛来顺塑胶有限公司 All Rights Reserved

鲁ICP备13031932号    Design By | dongbaqu